• State-of-the-Art Equipment
  

• Our rain gutter extrusion equipment is well maintained and protected from the elements as they are transported within our fully-stocked cube vans.  Our courteous installation staff is fully trained on all aspects of rainware installation requirements and expectations.

• We use only the highest quality materials from leading and industry recognized manufacturers.

• Product Specifications

Rainman is proud of offer a full range of rainware for your residential or commercial building.  Seamless rain gutter systems are available in:

• Aluminum
• 24 and 26 guage Steel
• 16 oz and 24 oz Copper
• 5-and 6-Inch OG or "K" Systems
• Standard closed and formed downspouts
• Chain-style drainage systems
• Custom rain gutters and rain ware systems

Finish

The rain gutter material is extremely tough and durable, providing rust and corrosion protection.  The finish is three coats of baked enamel plus a sealer coat.  Gutters are available in a wide range of decorator colors (contact us for a free color chart or check out our suppliers on their websites: Custom-Bilt, Alcoa, or WeatherGuard).

_{Note: Colors shown are mechanically reproduced. They may vary from the actual product. Please request an actual product sample for true color representation.}

Applications

• 5% zinc alloyed aluminum, .027" thick for 5" residential rain gutter applications.
• 24-26 gauge steel for 5" and 6" metal roof and commercial rain gutter applications
• Steel Copper Penny and solid copper gutter materials are also available in 5", 6" and 1/2-round rain gutter applications

Extrusion K-Style Gutters

Standard gutter extrusion is "K" or OGEE-style.  A wide assortment of 1/2 round gutters and downspouts are available to enhance the look of your home.

Hidden Hangers

Rainman Seamless Rain Gutters utilizes patented Raytec Hangtite ^(tm)Hidden Hangers installed at two-foot intervals for 5" aluminum gutters that are seven times stronger than the old spike and ferrule system.  Each hanger is 3/4" wide, 0.63" thick for strength and zinc alloyed for a lifetime of service.  These hangers maintain the shape and integrity of the gutter.  Each hanger is installed with a minimum 1.5" wood grip sealer screw resulting in a clean gutter face after installation.  This system is easily removed when necessary for roofing or painting.  Steel gutters are installed with hangers with closer intervals. 

Raytec Hangtite ^(tm)  Hidden Hangers have been proven to maintain their patented shape at 230 pounds of pull before hanger failure!  While other competitors may look the same, if it doesn't say Hangtite ^(tm) , it's not Raytec.  These lookalike hanges have been tested with the same method as Hangtite and they failed at 60 pounds and 51 pounds.  We've all seen icicles that weigh more than 60 pounds around our area.  Which hanger would you want installed on your home!

No spike and ferrule hanging system for water to travel down the shaft of the spike and into the fascia board, working loose and elongates holes in face of gutter or your facia (allowing moisture get back into your structure).  In colder climates like ours, the water on the spike tip may freeze, enlarging the hole and over time, the fascia board may be come damaged, needing to be replaced.

Contact Rainman to schedule a free estimate.